Aluminum Screen Enclosure — Member Sizing

Upload a drawing for AI-assisted data extraction, then size posts, purlins and beams against Elite3's 200 lb concentrated-load and wind-tributary method.

FBC 8th Ed. (2023) ASCE 7-22 Wind Aluminum Design Manual 2020 AI Drawing Extraction
Input Parameters
Upload Drawing (Optional)
📄
Drop a PDF or image, or click to browse
Site plan / structural drawing — AI will pre-fill fields below
Stored only in your browser (localStorage) and sent directly to Anthropic's API — shared with the STAAD.Pro Generator tool. Extraction always requires your review before use — never guesses or auto-submits.
Project Information
Site & Code Parameters
HVHZ = Miami-Dade & Broward counties.
Member Under Design
Geometry & Loads
Enter the full ASCE 7-22 Components & Cladding design pressure (Case A magnitude) from your wind analysis or the drawing. Serviceability checks automatically apply the 0.42×W factor per FBC §1616.3.1.
Candidate Sections Checked
2X2X.046 · 2X2X.050 · 2X3X.046 · 2X3X.050 · 2X4X.050 · 2X5X.050 — capacities and stiffness derived from Elite3's validated 200 lb concentrated-load span table.
Enter parameters and click  Calculate  to see results